Offering medical materials Masks, Medical devices for some countries becomes urgent supply after Knowing that the shortage of masks in customers'countries .
Our Management of XinLi Decided to donate some masks for Customers in their urgent need.
The typical thermal adhesive will give good adhesion to lith-offset print at temperatures of 205 to 230*F (96 to 110*C). There are many factors in the laminating machine that have to be considered. Higher laminating speeds call for higher temperatures as
XINLI thermal lamination films also passed the SGS testing without any Toxic chemical composition involved , and are in compliance with the China environmental labeling standards calling for no pollution to the public with green production
our company has introduced a set of film quality inspection equipment from the United States. The device's intelligent classification engine can accurately classify based on extremely small differences in defect categories
Silvering is small air bubbles between the thermal adhesive and the printed substrate. These occur when the paper has greater roughness, insufficient pressure in the lamination nip or the laminating temperature is too low. Generally, the paper is already
It is a good practice to let these warm sheets sit overnight to help set the interlaminar bond as they cool. It also helps hasten the curing of the litho-offset inks by oxidation. The problems can be a cohesive failure ink in that bond causing the laminat
